• TCAD Examples

andfex10.in : Impurity Activation Models

Requires: SSuprem 4
Minimum Versions: Athena 5.22.3.R

This example compares two Impurity Activation Models implemented in SSuprem 4. The first is the Solid Solubility Model which is default for all impurities except Arsenic. The second is the Static Impurity/Vacancy Clustering Model which is the default for Arsenic only. Any of these two models can be selected for a specified impurity/semiconductor combination. First, phosphorus diffusion simulation is made for the default Solid Solubility Model, while in the second part of the example the Clustering Model is specified for phosphorus in silicon.

Refer to the manual section 'Electrical Activation and Clustering Models' for a description of the models used.

To load and run this example, select the Load button in DeckBuild > Examples. This will copy the input file and any support files to your current working directory. Select the Run button in DeckBuild to execute the example.

Input Files
Output Results
These examples are for reference only. Every software package contains a full set of examples suitable for that version and are installed with the software. If you see examples here that are not in your installation you should consider updating to a later version of the software.
Copyright © 1984 - Silvaco, Inc. All Rights Reserved. | Privacy Policy