Analyzer - Zoom and scrolling controls

027_analyzer_zoom : Analyzer - Zoom and scrolling controls

Minimum Required Versions: SILOS 4.12.1.C

Example 027_analyzer_zoom, the circuit is a newspaper vending machine implemented as a Verilog gate level design. The Gateway schematics for the testbench and circuit as well as the netlist and the library files vend.gv and abc_100.v.

This example shows the feature of the SILOS graphical user interface for Analyzer Zoom and scrolling controls.

Analyzer - Zoom and scrolling controls

  • Open the project gate.spjx and run simulation.
  • Open the Analyzer window from toolbar.
  • Click plus button in toolbar to 2x zoom in the Analyzer window.
  • Click minus toolbar button to 2x zoom out.
  • You can also use CTRL++ to zoom in and CTRL+- to zoom out.
  • To set T1 and T2 marker, you can zoom between these two markers clicking Zoom Markers button or CTRL+M.
  • Use the scroll bar to scroll the Analyzer window from the start to the end of the simulation time.
  • The waveform window is scrolled vertically by rolling the scroll wheel, and horizontally by rolling the wheel holding down the Shift key.
  • To scroll in larger steps, press Ctrl key and Shift key simultaneously while scrolling.