Simulation Standard - 2015


 





Download

Volume 25, Number 1, January - February - March 2015

Plasmonic Light Trapping Transforming Thin-Film Photovoltaics

Hints, Tips and Solutions
Q. How can I develop my own etch model in Victory Process?

Hints, Tips and Solutions
Q. How can I Crop and Slice in the Victory Process 3D Exports?

Hints, Tips and Solutions
Defining VWF Curve Target For Curve Calibration

 





Download

Volume 25, Number 2, April - May - June 2015

Vertical LOCOS Power Devices in Victory Process: From 3D Process and Electrical Optimisation to High Speed, Full Chip Process Emulation

Optimizing Solar Cell Top Metal Contact Design Introduction

Radiant: GUI-based Design Software for Performing Simulations of Optoelectronic Thin Film Devices Such as LED and OLED

Hints, Tips and Solutions
Q. How can I Mirror 3D structures in Victory Process?

 





Download

Volume 25, Number 3, July - August - September 2015

Electrical Simulation of Liquid Crystals

Performance Improvement by MPI Parallelization in 3D Device Simulation

Improvements and Features of the Updated DeckBuild 2 GUI

Hints, Tips and Solutions
Q. How can I do local conformal mesh refinement in Victory Process?

 





Download

Volume 25, Number 4, October - November - Deceember 2015

3D TCAD Mixed-Mode Simulation of Current Filaments in IGBT Multicell Array under Short-Circuit Condition

Optical Simulation of Organic Light Emitting Diode by Transfer Matrix Method with a Green’s Function Approach and 2D FDTD

Deep Hole Etching Simulation for Advanced NAND Flash Memory

Performance Evaluation of a New Hybrid MPI-thread Parallelized Direct Solver

Hints, Tips and Solutions
Q. How can I create scalable devices using Victory Process?