First Pass Success - Silicon Creations Successfully Tapes Out Complex RF Chip Using Simucad’s Complete RF Tool Flow

Santa Clara, CA, April 22nd, 2009

Silicon Creations, a company that specializes in high performance analog and mixed-signal integrated circuit design, has successfully taped out their fourth high performance chipset using an all-Simucad tool flow.

The IC chip was manufactured, measured, and met or exceeded all design specifications on the first pass.

Simucad Design Automation is a leading provider of Analog, Mixed-Signal and RF Electronic Design Automation (EDA) software.

The Silicon Creations 1.9-3.8GHz LC based fractional-N PLL synthesizer IC was designed, simulated and laid out using ST Micro’s 90nm RF process. The Simucad Analog Mixed-Signal design flow included SmartSpiceRF and the Custom IC CAD design suite.

Jeff Galloway, Co-Founder of Silicon Creations, described the IC, "The IC is a multiband LC fractional-N synthesizer. The chip contains a 4 VCO core, low noise PLL, and a third order Delta-Sigma modulator. The IC can be used for RF local oscillator synthesis or clock generation for SONET or Ethernet applications. The spot noise is better than -130dBc/Hz at 1MHz offset and the integrated jitter is roughly 250fs RMS. The output range is 1.9 to 3.8 GHz."

Galloway further described the toolset used, "We used Gateway for schematic entry, SmartSpice for analog simulation, Harmony for mixed-signal simulation, SILOS-X for digital verification and system modeling, Expert for layout editing, Guardian DRC/LVS/NET for physical verification, and HIPEX for hierarchical and parasitic extraction. We used a 16 machine cluster to run SmartSpice for thorough analog verification. We relied on SmartSpiceRF for our RF simulations, and were impressed how closely the simulations matched the measurements from the final silicon."

"It is always great to work with dedicated professionals like the designers at Silicon Creations,” said Mr. Will Klein, Senior Application Engineer at Simucad. “We are pleased that our tools can help them save time and money by accurately predicting their product’s performance."

About Silicon Creations 

Silicon Creations, founded in 2006 to provide analog and mixed signal integrated circuit design services for high performance custom applications, is a privately held company headquartered near Atlanta, GA. It maintains a sales presence in the United States and Japan.

For more information about Silicon Creations, please visit www.siliconcr.com.

Contact:
Mr. Randy Caplan, Co-Founder
408-564-0078

About Simucad Design Automation 

Simucad Design Automation is a leading provider of simulation and CAD software tools used for developing analog, mixed-signal, and RF integrated circuits. Founded in 2004 as a spin-off from Silvaco International, the company delivers products for circuit simulation, custom IC layout and verification, interconnect modeling, digital simulation, and IP characterization. The company provides a complete PDK-based design flow with interfaces to third-party design platforms.

Simucad has a worldwide presence inherited from Silvaco's twenty years of business and is preparing for an IPO.

More information:
Dr. Ivan Pesic
408-567-1000