Analyzer - Markers

030_analyzer_markers : Analyzer - Markers

Minimum Required Versions: SILOS 4.12.1.C

This example demonstrates the use of the Analyzer Markers to measure time points and time differences.

Example 030_analyzer_markers, the circuit is a newspaper vending machine implemented as a Verilog gate level design. The Gateway schematics for the testbench and circuit as well as the netlist and the library files vend.gv and abc_100.v.

This example shows the feature of the SILOS graphical user interface feature for Analyzer Markers to measure time points and time differences.

Analyzer - Markers to measure time points and time differences

  • Open the project gate.spjx and run simulation.
  • Open the Analyzer window from toolbar.
  • To set T1 and T2 markers, move the cursor to the Waveform Display window and click left mouse button to set T1 marker and right mouse button to set T2 marker.
  • SILOS will show each T1 and T2 marker time point in Waveform Display window and also show T1 and T2 time differences at the bottom of the SILOS window.